SURFOX Electrochemical Weld Cleaning Systems, a safer, faster way to clean stainless steel welds!
SAFE SURFOX cleaning electrolytes are NSF certified to be used in food plants and pose no health hazards to operators.
FAST Uniform cleaning and passivation at a rate of 1 to 2 metres per minute.
EASY TO USE The integrated reservoir and dispensing pump automatically delivers the cleaning electrolyte to the tip of the SURFOX machine to ensure no interruption in the cleaning process.
The SURFOX system is ASTM A967 (ASTM A380) certified for passivation and registered with the NSF for use in food plant applications.
SURFOX, the FAST, and SAFE solution for weld cleaning...
Stainless steel is used in a wide range of industries such as food & beverage, pharmaceutical, architectural and transportation, etc. SURFOX is the ideal solution to clean welds in these industries as it is safe (NSF certified) and does not alter the finish of the surfaces.
Stainless steel is generally able to resist corrosion thanks to the formation of a passive, chromium-oxide layer that forms on its surface, called passivation.
Passivation occurs whenever the chromium contained in stainless steel comes in contact with oxygen from ambient air. The chemical reaction will form a passive chromium oxide layer, which will protect the stainless steel surface. In order to maximize thickness and uniformity of the chromium oxide.
In AC (alternating current) mode, SURFOX cleans the weld, removing the heat tint and restoring the original finish. In DC (Direct Current) mode, SURFOX will electropolish the weld, improving the finish.
To completely neutralize, first remove excess electrolyte solution from the parent material with a shop rag or paper towel. Then neutralize by spraying an alkaline cleaner such as UNO or FT 100 on the surface, and finally wipe the surface down with clean rag. If excess acid is not removed from the surface, neutralisation will result in the formation of salt residues on the surface of ther stainless steel.
Go ahead, make your mark! SURFOX marking kits use a fast and simple electrochemical process to permanently mark Stainless steel surfaces. The marking wand plugs directly into the SURFOX machine and is used with specially made permanent or disposable stencils.
Revolution Materials P/L is the authorised distributor of SURFOX products in Australia.
